Back to Search

NTSB investigation record

ANC22LA055

Completed

Cessna 182C· N757R

Date
May 22, 2022
Location
Port Moller, AK
Conditions
VMC
Record
Published February 9, 2023

Primary finding

Probable cause

The pilot’s inadequate preflight inspection, which did not detect a screw in the control yoke column, and his failure to confirm flight control continuity before takeoff.

Investigator assessment

Analysis narrative

The pilot reported that he remembered only portions of the accident sequence due to injuries sustained in the accident. He said that during takeoff from a remote, grass-covered site, as the airplane accelerated, he recalled discovering that there was no elevator control when he moved the control yoke aft. The next thing he remembered was being upside-down in the airplane immediately after the accident. The airplane subsequently impacted terrain, sustaining substantial damage to the fuselage, wings, and vertical stabilizer. After the accident, a camp helper told the pilot that due to windy conditions the prior evening, he had placed a large screw through the hole in the control yoke column, but he had forgotten to tell him. The pilot reported no preimpact mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Continue research

Find similar accidents

Continue with the strongest shared characteristics.