ANC25MA018

On February 6, 2025, about 1520 Alaska standard time, a Textron Aviation (Cessna) 208B airplane, N321BA, operated as Bering Air flight 445, was destroyed when it was involved in an accident near Nome, Alaska. The pilot and nine passengers were fatally injured. The airplane was operated as a Title 14 Code of Federal Regulations (CFR) Part 135 scheduled commuter flight. FLIGHT SUMMARY AND COMMUNICATIONS The operator reported the pilot initially departed from Nome Airport (PAOM), Nome, Alaska, and proceeded to Saint Michael Airport (PAMK), Saint Michael, Alaska, and then to Unalakleet Airport (PAUN), Unalakleet, Alaska. He arrived at PAUN about 1028. The pilot was expected to depart PAUN and return to PAOM that afternoon, according to the operator. The following flight summary was compiled from archived Federal Aviation Administration (FAA) automatic dependent surveillance-broadcast (ADS-B) data, preliminary recordings of communications between the pilot and Anchorage Air Route Traffic Control Center (ARTCC), and preliminary data downloaded from the onboard avionics. At 1436, the pilot contacted Anchorage ARTCC, reported that he was on the ground at PAUN, and requested an instrument flight rules (IFR) clearance to PAOM. The pilot was subsequently cleared to PAOM via the EMMMO waypoint intersection at a cruising altitude of 8,000 ft mean sea level (msl). At 1437, the pilot departed from runway 33 at PAUN and proceeded west over Norton Sound toward PAOM. At 1440, the pilot contacted Anchorage ARTCC, and the controller advised the pilot that radar contact was established. About 1440, Anchorage ARTCC contacted the Nome Alaska Flight Service Station (AFSS) to inform them that the flight was estimated to arrive at PAOM about 1535. About 1449, the flight leveled at a cruising altitude of 8,000 ft msl; it was about 20 miles west of PAUN. At 1456, the controller cleared the flight to descend and maintain 6,000 ft msl at the pilot’s discretion. At 1511, the pilot initiated a descent from 8,000 ft msl, which he reported to the controller. He also advised receiving current weather and airport information at PAOM. The flight was about 50 miles east of PAOM at that time. During the descent, the airplane’s airspeed increased from about 150 knots to about 160 knots. At 1512, Nome Airport operations advised Nome AFSS that runway 10/28 was being closed temporarily for deicing, and Nome AFSS subsequently advised Anchorage ARTCC of the runway closure. Deicing was estimated to take 10 to 15 minutes. At 1514, the controller informed the pilot that the runway at PAOM was closed and expected to reopen in 10 to 15 minutes. The controller added that if the pilot wanted to “slow down a little bit” to prevent the flight from arriving before the runway reopened, that would be fine, and the pilot acknowledged. About that time, the airplane’s airspeed began to decrease and was accompanied by a reduction in engine power. About 1515:30, the airplane leveled at 6,000 ft msl. About 15 seconds later, the airspeed reached about 110 knots; however, it increased to about 120 knots about 2 minutes later. About 1516, the controller instructed the pilot to descend and maintain 4,000 ft msl at the pilot’s discretion, and the pilot acknowledged. Shortly afterward, the airplane began to descend. About 1519:20, the airplane leveled at 4,000 ft msl and the engine power started to gradually increase. At that time, the airplane’s airspeed was about 112 knots; however, it continued to decrease. At 1519:35, the autopilot disengaged. At that time, the airplane’s airspeed was 99 knots. About 19 seconds later, the airspeed had decreased to about 70 knots, and the altitude was about 3,100 ft msl which was the end of the data available from the onboard avionics. During that time, the airplane had turned from a westerly course to a southerly course. At 1520:07, the controller instructed the pilot to climb and maintain 4,000 ft msl. The final ADS-B data point was recorded at 1520:09 and located about 32 miles east of PAOM and about 12 miles offshore over the Norton Sound. The airplane’s altitude associated with that data point was 1,325 ft msl. Satellite tracking data provided by a third-party vendor recorded two additional data points. The final satellite tracking data point corresponded to a time of 1520:17 and an altitude of 200 ft msl. At 1520:18, the controller transmitted a low altitude alert to the pilot. The controller’s efforts to contact the pilot were not successful, and no further communications were received. PILOT QUALIFICATIONS AND EXPERIENCE The pilot held a commercial pilot certificate with ratings for single-engine and multiengine land airplanes, with instrument privileges in airplanes. He held a BE-1900 type rating with a limitation for second-in-command privileges only. He held a mechanic certificate with airframe and powerplant ratings, and a remote pilot certificate with a small, unmanned aircraft system rating. He was issued an FAA first-class medical certificate on December 3, 2024, with no limitations. The pilot was employed by the operator as a pilot since March 2022. His most recent 12-month competency check (as required by 14 CFR 135.293) was completed on December 9, 2024. His most recent 6-month instrument proficiency check (as required by 14 CFR 135.297) was completed on September 22, 2024, at Flight Safety in Wichita, Kansas. His most recent 12-month flight (line) check (as required by 14 CFR 135.299) was completed on July 28, 2024. The pilot had completed the Cessna Cold Weather Operations course on October 29, 2024, and recurrent ground training on January 17, 2025. At the time of the accident, he was based at PAOM. The pilot had accumulated about 2,500 hours total flight time, including 1,060 hours in 208B airplanes. He had flown about 58.4 hours within the preceding 30 days, and 4.4 hours within the preceding 7 days. OPERATOR AND AIRPLANE INFORMATION The airplane was a Textron Aviation 208B (serial number [s/n] 208B5613). It was powered by a Pratt and Whitney PT6A-140 turbopropeller engine (s/n PCE-VA0701) capable of producing 867 shaft horsepower and a McCauley 4HFR34C778 (s/n 191258) four-blade, controllable pitch propeller. The airplane was manufactured in 2020 and issued a normal category, standard airworthiness certificate on December 3, 2020. It was purchased by the operator on December 29, 2020. A fuselage cargo pod was installed along the bottom of the fuselage. At the time of the accident, the airplane was configured with two pilot seats and nine passenger seats. The airplane was equipped with a TKS ice protection system that included porous titanium panels along the leading edges of the wings, horizontal and vertical stabilizers, and wing struts. The TKS system was designed to provide ice protection fluid from a tank in the cargo pod to the panels, propeller, and windshield to prevent the accumulation of airframe ice. The pilot operating handbook (POH) supplement related to the TKS system specified a minimum indicated airspeed of 95 knots be maintained for operations in icing conditions with a fully functional TKS system. The supplement also noted that the maximum allowable takeoff gross weight for flight into known or forecast icing conditions was the same as that of the basic airplane, which was 8,807 lbs. The operator reported that the quantity of ice protection fluid was checked during each preflight inspection. The pilot was responsible for ensuring that a sufficient quantity was onboard for each flight. However, no record was required when ice protection fluid was added to the airplane. A customer service representative at PAUN stated that ice protection fluid was available and that the pilot informed her that the TKS tank was full. According to the operator’s fueling log, the pilot had requested that 1,800 lbs of fuel be onboard the airplane before departure from PAOM. According to the customer service repres