Back to Search

NTSB investigation record

CEN10CA428

Completed

Bell 206B· N40TA

Date
July 23, 2010
Location
New Hampton, IA
Conditions
VMC
Record
Published September 25, 2020

Primary finding

Probable cause

The pilot's failure to maintain clearance from wires.

Investigator assessment

Analysis narrative

The pilot reported that he struck wires at the end of an aerial application spray run, which caused the helicopter to shake violently. During the emergency landing, the helicopter landed hard and rolled over on its right side. The helicopter sustained substantial damage to its fuselage, main rotor, and tail rotor. The pilot stated that he should have performed a better “recon” for obstacles and wires in the field.

Source record

Factual narrative

The pilot reported that he struck wires at the end of an aerial application spray run which caused the helicopter to shake violently. During the emergency landing, the helicopter landed hard and rolled over on its right side. The helicopter sustained substantial damage to its fuselage, main rotor, and tail rotor. The pilot stated that he should have performed a better “recon” for obstacles and wires in the field.

Continue research

Find similar accidents

Continue with the strongest shared characteristics.