Back to Search

NTSB investigation record

WPR10CA066

Completed

Nephew alan h Kitfox· N7824L

Date
November 27, 2009
Location
Agua Caliente Springs, CA
Conditions
VMC
Record
Published September 25, 2020

Primary finding

Probable cause

The pilot's failure to maintain an adequate glide path that ensured obstacle clearance during final approach to land.

Investigator assessment

Analysis narrative

The pilot of the experimental airplane reported that he observed the airport windsock during the downwind leg for landing, and determined the winds to be light and variable. He maneuvered the airplane from base to final on an approach path that he deemed suitable for a short field landing. He reported that the airplane encountered a downdraft as he approached within 100 feet of his intended touchdown zone. He attempted recovery by increasing engine power, but the landing gear struck a berm. He then applied full engine power, and the airplane struck a second berm, collided with the ground, and came to rest just beyond the beginning of the runway. The airplane sustained substantial damage to the wings and the fuselage during the accident sequence. The pilot reported that the airplane and engine had no mechanical failures or malfunctions prior to the accident. He further stated that the accident could have been prevented if he had reviewed the airport guide, which referenced the existence of runway obstructions, and adjusted his landing approach accordingly.

Source record

Factual narrative

The pilot of the experimental airplane reported that he observed the airport windsock during the downwind leg for landing, and determined the winds to be light and variable. He maneuvered the airplane from base to final on an approach path that he deemed suitable for a short field landing. He reported that the airplane encountered a downdraft as he approached within 100 feet of his intended touchdown zone. He attempted recovery by increasing engine power, but the landing gear struck a berm. He then applied full engine power, and the airplane struck a second berm, collided with the ground, and came to rest just beyond the beginning of the runway. The airplane sustained substantial damage to the wings and the fuselage during the accident sequence. The pilot reported that the airplane and engine had no mechanical failures or malfunctions prior to the accident. He further stated that the accident could have been prevented if he had reviewed the airport guide, which referenced the existence of runway obstructions, and adjusted his landing approach accordingly.

Continue research

Find similar accidents

Continue with the strongest shared characteristics.